Learn about one-piece toilets

Before installing a one-piece toilet, you first need to understand what a one-piece toilet is. A one-piece toilet is a design in which the water tank and toilet are integrated into one, which looks beautiful and is easy to clean.

Preparation

Before installing a one-piece toilet, the following preparations are necessary:

• Confirm the installation location: Make sure that there are sufficient drainage and water inlet pipes at the planned installation location.
• Prepare tools: such as wrenches, screwdrivers, sealing rings, sealants, etc.
• Check the product: Make sure the one-piece toilet and its accessories are not damaged.

Installation Steps

Follow the steps below to install a one-piece toilet:

1. Install the base: Align the toilet base with the floor drain outlet, making sure it is aligned and secure.
2. Fix the base: Use screws to firmly fix the base to the ground and check if it is loose.
3. Connect the water inlet pipe: Connect the water inlet pipe to the water tank and ensure it is well sealed and leak-proof.
4. Install water tank accessories: Install the internal accessories of the water tank, such as float, drain valve, etc. according to the instructions.
5. Sealing: Use sealant to seal the toilet base and the edge of the ground to prevent water leakage.

Precautions

During the installation of the one-piece toilet, the following points need special attention:

• Avoid using strong acid or alkali cleaners to avoid damaging the ceramic surface.
• During installation, be sure to turn off the water and electricity to avoid accidental injuries.
• Check all connections for leaks.
• Read the product manual carefully and follow the steps.

Summarize

After completing the installation of the one-piece toilet, you will enjoy a more comfortable and convenient bathroom experience. If you have any questions or installation difficulties, it is recommended to seek the help of a professional master to ensure the installation effect.